NPI NPI LABSEngineered Around Your Part
Rapid prototyping fixtures · Customized to your part

Rapid prototyping
fixtures,
customized to
your part.

We are a rapid prototyping fixture shop. Share your part, we design a customizable fixture around its exact geometry — for torquing, clamping, assembly, and potting electronics — move to a working prototype fast, iterate with you, then build the production fixture. No universal plates. No waiting weeks to find out if it fits.

Send email request →
5–10 DAYS Fixture in hand · design concept in 48 hrs
5–10 days
Part info → fixture in hand
48 hrs
Design concept + 3D review
Rapid
Prototype, test & iterate fast
100%
Customized to your part

Design it. Fit it. Iterate.
Production-ready in 5–10 days.

Every job moves quickly from design to a working prototype shaped to your part — so you can check fit, clamping, and handling early and iterate before the production build.

Rapid prototyping in the NPI Labs workshop during fixture development
01 · Design itDesigned from your part

Nests and cradles designed from your drawings, photos, and process video — shaped to your geometry, not a catalog blank.

Hands test-fitting a part into a fixture with a toggle clamp
02 · Fit itTest-fit on the real part

Clamp position, loading, and clearance checked by hand on your actual part — feel beats guessing from a screen.

Fixture holding a green printed circuit board for potting and assembly
03 · IterateChange it the same week

Fit off? Nest tweaked and revised fast. Boards, connectors, housings — each revision moves quickly, without a long queue.

Collection of custom prototyping fixtures and nests on a bench, one clamping a tubular part
04 · Production-readyThen built to last

Once the prototype proves the design, we build the production fixture from the same files — validated against your part.

FROM PART INFO TO FIXTURE IN HAND: 5–10 DAYS
The process · Rapid prototyping first

Customized to your part. Prototyped fast.

Four steps, no long queue. The prototype is step three — not an afterthought — which is how the whole job stays inside 5–10 days.

Step 01

Share your part

Send an email request with your part info — drawings or CAD if you have them, photos and video of your part and process, and what the fixture must do.

Step 02

Fixture design

We engineer the fixture around your part's geometry and process, then walk you through a 3D review and fold in your feedback — fast.

Step 03 · Core step

Quote & rapid prototype

A clear quote with a 5–10 day lead time up front, then a rapid prototype you can run on your real part and iterate on.

Step 04

Build, validate & deliver

Machined, assembled, and fit-checked against your part — shipped with documentation and calibration records.

Applications · What gets customized

Where customized fixtures get used

A different fixture for every part — because your part is different.

Battery packs, EV motors, robotics joints, aerospace fasteners, medical assemblies, potted electronics — if standard grips can't hold it, that's the job a customized fixture is for. Tell us the part geometry, torque spec, and how the fixture will be used, and each application below shows the distinct fixture that part needs.

Fixture models · Starting points for your prototype

Start from a model. Prototype it around your part.

Three starting configurations — reaction, inline validation, and end-of-line. Each one is prototyped, fitted, and customized to your part before it becomes your production fixture. Pricing is provided with your custom quote.

Reaction torque fixture clamping a finned motor with toggle clamps
RT-250 · Reaction

Reaction Torque Fixture

Bench fixture that locks the housing while the shaft is loaded — prototyped around your bolt pattern and housing.

Lead time: 5–10 days
Inline torque validation bench with rotary transducer and encoder between two motors
IV-500 · Inline Validation

Inline Validation Fixture

Live torque and angle curves on a rigid rail — fitted to your shafts and couplings, proven on a rapid prototype first.

Lead time: 5–10 days
End-of-line production torque fixture with pneumatic clamps and safety guarding
EL-1000 · End-of-Line

End-of-Line Production Fixture

Pneumatic clamping and fast changeover for every unit on the line — nests prototyped per motor variant.

Lead time: 5–10 days

Customizable fixtures · Four application areas

Customizable Fixtures for Torquing, Clamping, Assembly, and Potting

NPI Labs designs and builds fixtures around your part and process — not around a standard catalog envelope. Every fixture is customized from your drawings and process videos and prototyped fast, across four core application areas.

Application 01

Torquing

Controlled torque application and reaction support for threaded fasteners, shafts, and rotating assemblies. Fixtures absorb reaction loads, support calibrated measurement, and record results per part where traceability is required.

Reaction · inline · end-of-line
Application 02

Clamping

Secure, repeatable workholding that locates each part on its design datums. Toggle, pneumatic, and bolt-down clamping options, including insulated and non-marring contact surfaces for finished, coated, or energized parts.

Toggle · pneumatic · bolt-down · non-marring
Application 03

Assembly

Guided assembly fixtures that hold components in position and in sequence. Keyed nests, part-present sensing, and pass/fail verification reduce operator variation and identify errors before an assembly is closed.

Keyed nests · part-present sensing · pass/fail
Application 04

Potting Electronics

Fixtures that hold printed circuit boards, connectors, and housings in alignment during dispensing and curing. Machined dams and molds define the potting boundary and compound depth, in materials selected for compatibility with common encapsulants.

PCB & connector alignment · dams & molds · cure support
How it works

Share your part.
Get a fixture built around it — fast.

Every fixture starts from your part. Send an email request with your part info — drawings, photos, a video of your process — and your part drives the design: mounting pattern, shaft or fastener layout, dimensions, and process targets. We prototype quickly so you can run it, react, and iterate. No shimming universal plates into almost fitting.

  • One email request with your part info — drawings, photos, videos
  • Fixture customized to your exact part geometry and process
  • Design concept and 3D review within 48 hours of receiving your info
  • Rapid prototype, then built, validated against your part, and shipped with documentation

Machinist assembling a custom aluminum motor torque fixture on a workbench

Rapid Prototyping Fixtures

Showing 1 – 3 of 3 fixture models · Every model prototyped around your part · 5–10 day lead time

NPI Labs is a rapid prototyping fixture shop. The reaction, inline validation, and end-of-line models below are starting configurations for customizable fixtures for torquing, clamping, assembly, and potting electronics: for each project we prototype first, then customize the mounting interface, workholding, capacity, and sensing to your part geometry and process requirements. Share your part info and we'll prototype fast — see how it works.

View

Need a range or motor size outside the standard builds? Every fixture is made to order — configure a custom build in the quote tool. Pricing is provided with your custom quote, after we review your part info and the design.

How NPI Labs Works

Share your part. Fixture designed around it. Fast prototype.

Send us your part info and we design a customizable fixture for torquing, clamping, assembling, or potting electronics — engineered around your exact geometry and process. We prototype it fast, iterate with you, and deliver a fixture that's ready to use.

Send email request
Customized to your exact part Rapid prototyping turnaround
THE 4-STEP FLOWShare → Ship
Share your part
Email us drawings, photos, videos
• Step
Custom design
Fixture engineered around your part
• Step
Fast quote & prototype
Rapid prototyping, quick turnaround
• Step
Fixture in hand
Built, validated, ready to use
• Step

Watch: share your part → custom design → fast prototype → delivered fixture

Our short explainer walks through all four steps below. The finished video drops into this player — until then, the steps on this page are the full walkthrough.

01

Share Your Part

It starts with one email. Send us what you have on your part — drawings or CAD if you have them, photos and a video of the part and your current process, and what the fixture needs to do. No portals or forms to fill out: just an email request with your info, and we take it from there.

What to include

  • Part drawings or CAD if available — STEP, IGES, SLDPRT, or PDF/DWG drawings
  • Photos and videos of the part and your current assembly / torquing process
  • What the fixture must do — torque, clamp, assemble, or pot electronics
  • Torque and process specs: target values, sequence, pass/fail criteria
  • Quantities, number of part variants, and your target date

Don't have full CAD?

  • Dimensioned photos and a process video are enough to start many designs
  • We'll tell you exactly what else we need — nothing more
  • You can also sketch your configuration first in the quote tool
  • We reply with next steps, usually within one business day
Send email request with info →
02

NPI Labs Fixture Design

We design the customizable fixture around your actual part — not a catalog approximation of it. The cradle or nest geometry, how it's clamped and located, the torque and reaction path, and the sensors your process needs are all engineered from your part's geometry and the way you work today. Video matters as much as CAD: watching how the part is loaded, torqued, and unloaded is how we catch the handling details drawings don't show.

Designed around your part

  • Nest and cradle geometry machined to your part's outline and datums
  • Clamping matched to your part material and cycle time
  • Torque and reaction path sized to your spec — not the operator's wrist
  • Fixture model (RT-250, IV-500, or EL-1000) customized to the application

You review the 3D design

  • Design concept with a 3D model you can rotate, measure, and share internally
  • We walk through it with you — loading, clamping, changeover, ergonomics
  • Your feedback and revisions are folded in fast, before the design is frozen
  • Design concept back to you within 48 hours of receiving your part info
03

Quote & Rapid Prototype — the core of what we do

Once the design is right, you get a clear quote — price and a 5–10 day lead time up front — and we move straight into a fast prototype. Rapid prototyping is how we work: get a working fixture in your hands quickly, run it on your real part, and iterate from what you learn.

5–10 days

From approved design to fixture in hand. The rapid prototype comes first, so fit and feel are proven before the production build — that is what keeps the timeline at 5–10 days, not weeks.

What your quote includes

  • Quoted price for the fixture as designed — no open-ended engineering hours
  • Lead time of 5–10 days, stated up front
  • What's included: plates/nests, sensors, calibration, documentation
  • Pricing for extra plates, nests, and future part variants

Prototype fast, iterate quickly

  • Prototype built from the approved design without a long queue
  • Run it on your real part and process — fit, feel, and cycle time
  • Adjustments folded in quickly: nest tweaks, clamp changes, sensor options
  • The prototype becomes the template for your production fixture
Close-up of rapid prototyping in progress in the workshop
Building the first prototypeFixture nests and cradles are prototyped first — fast enough to test-fit your part the same week.
Hands test-fitting a part into a custom rapid prototyping fixture with a toggle clamp on a workbench
Test-fit on your real partHands-on fit check with the prototype: clamp position, loading, and clearance are adjusted from what you feel, not just the model.
Rapid prototyping fixtures on a bench, one holding a tubular part in a custom nest with a toggle clamp
Custom nests, ready to iterateA custom nest holding the part under a toggle clamp — if the fit is off, the next iteration moves fast and the design moves on.
04

Build, Validate & Deliver

We machine and assemble the fixture on our own CNCs, then validate it the way you'll use it — fit-checked against your part, or against your process video and specs when the part can't travel. It ships only when it works the way the design review said it would — and because the prototype already proved the design, delivery stays fast.

Before it ships

  • Fit check against your part or a machined replica from your CAD
  • Torque and repeatability validation with the report in the crate
  • Photo and video of the finished fixture running your cycle, sent before shipping

After delivery

  • Setup and operating documentation, plus calibration records
  • Support for tweaks and iterations — small adjustments are part of the process
  • Extra plates and nests for your next variant, designed from the same files
  • 2 year warranty on every fixture
48 hrs
Design concept after files arrive
1,400+
Fixtures shipped since 2021
5–10 days
Lead time on every fixture
100%
Customized to your part
Why teams pick this process

Built around your part — prototyped fast

Customized

Engineered around your geometry

No universal plates shimming into almost fitting. The nest, clamping, and load path are designed from your part's own datums and dimensions.

Designed in

You review the 3D design

No surprise tooling. You see the fixture around your part, request changes, and approve before we build.

Validated

Proven before it ships

Fit-checked and run against your part or process, with the validation report in the crate — not discovered on your line.

Start now — step 1 is one email

Send an email request with your part info — drawings, photos, or a process video — and the design concept is back to you within 48 hours.

Send email request with info →

inquiry.npi.labs@gmail.com · www.npi-labs.com · (415) 555-0134 · Mon–Fri, 8am–6pm PT

Applications & Use Cases

Applications for Customizable Fixtures

Standard workholding is rarely designed for parts such as battery packs, precision actuators, sterile medical housings, potted electronic assemblies, or high-torque gearboxes. Each application below states the engineering problem, how the fixture is customized to address it, and the fixture model it starts from.

Don't see your exact part?

That's the point of customizable. Send us a drawing, a photo, or just dimensions and a torque spec — we'll map it to a fixture model and tell you what we'd customize.

Email inquiry.npi.labs@gmail.com

Configuration · Custom build

Configure Your Fixture

Tell us the use case, part dimensions and geometry, torque requirements, and volumes — we will configure a fixture model around them and summarize the configuration for your inquiry. Formal pricing is provided with your custom quote, after we review your part info — see how it works.

Configure your fixture

Fields marked optional can be left blank — we'll confirm details before cutting metal.

Configuration summary

A formal quote is provided after we review your part info and the custom design.

Complete the configuration and select “Review my configuration” — a summary for your inquiry will appear here, including lead-time guidance.
Resources

From the Bench

Notes on specifying, calibrating, and running torque fixtures — written by the people who machine them.

Contact Us

Have a part standard fixtures can't hold?

Tell us about your application — torquing, clamping, assembly, or potting electronics. Send a drawing, dimensions, and your process requirements, and we will reply with the fixture model we would start from and the customization we recommend.

inquiry.npi.labs@gmail.com

www.npi-labs.com

Email us your application

Prefer to talk? (415) 555-0134 · Mon–Fri, 8am–6pm PT

What to include in your email

  • Part or motor type, dimensions, and a drawing / CAD or photo if you have one
  • Torque range, direction, and any sequence or pass / fail requirements
  • What needs protecting — cells, housings, sterile or ESD-sensitive surfaces
  • Quantity, expected volumes, and your timeline

We reply from inquiry.npi.labs@gmail.com — usually within one business day with next steps and a CAD fit-check offer.